Concrete Driveway Cost Calculator
A concrete driveway is one of the most popular upgrades for curb appeal and daily durability, and this concrete driveway cost calculator helps you estimate pricing before you hire concrete driveway contractors. For most homeowners, concrete driveway installation cost runs from $9 to $16 per sq ft in USD, depending on the finish and whether you choose a basic slab or a stamped concrete driveway.
Estimate concrete driveway cost
Rough guide based on US averages. Real quotes vary by site, finish and contractor.
Estimates are indicative only. For an accurate price, get free quotes from local contractors above.
Concrete Driveway Price Breakdown
Typical job based on 600 sq ft. Prices are supply-and-install midpoints — actual quotes will vary.
| Type | Cost per sq ft | Typical 600 sq ft job |
|---|---|---|
| Broom finish (4 in) | $9 | $5,400 |
| Reinforced (5 to 6 in) | $12 | $7,200 |
| Exposed aggregate | $13 | $7,800 |
| Stamped and colored | $16 | $9,600 |
What Affects Concrete Driveway Cost?
- Driveway size: Concrete driveway cost is calculated by area, so the total rises as square footage increases. A typical two-car driveway is about 20 by 30 ft, or 600 sq ft.
- Finish and slab type: Your finish has a major impact on price. Mid-range pricing starts at $9 per sq ft for a broom finish, $12 per sq ft for reinforced 5 to 6 inch concrete, $13 per sq ft for exposed aggregate, and $16 per sq ft for stamped and colored concrete.
- Old driveway removal: A new pour on a prepared base is the baseline. Tearing out an old driveway adds $4 per sq ft for demolition and haul-away. Building permits are often $100 to $500 and are not included in the estimate.
- Minimum job pricing: Very small projects may be affected by the minimum job charge. When the calculated total falls below $2,000, the displayed price is raised to the $2,000 minimum.
Concrete Driveway Cost - Frequently Asked Questions
Concrete driveway cost typically ranges from $9 to $16 per sq ft, depending on the finish you choose. For a typical 600 sq ft driveway, that works out to about $5,400 for broom finish concrete, $7,200 for reinforced, $7,800 for exposed aggregate, or $9,600 for stamped and colored concrete. The displayed estimate range is usually shown at plus or minus 20 percent around those midpoint prices.
Using the default 600 sq ft example, concrete driveway installation cost starts at $5,400 for a broom finish and goes up to $9,600 for stamped and colored concrete. Reinforced concrete is about $7,200, and exposed aggregate is about $7,800. If the old driveway has to come out first, add $4 per sq ft, or $2,400 for 600 sq ft.
Concrete driveway contractors commonly price work by square foot. Based on this calculator, mid-range supply and install pricing is $9 per sq ft for broom finish, $12 for reinforced, $13 for exposed aggregate, and $16 for stamped and colored. If an old driveway has to come out first, add $4 per sq ft.
A stamped concrete driveway costs about $16 per sq ft at the midpoint for stamped and colored concrete. For a 600 sq ft driveway, that comes to about $9,600 before tear-out. If the old driveway has to come out first, add $4 per sq ft, bringing the midpoint total to about $12,000.
This calculator is based on full concrete driveway installation pricing, not resurfacing-only work. A new pour on a prepared base is the baseline, and tearing out an old driveway adds $4 per sq ft. For replacement pricing, that means a 600 sq ft broom finish driveway increases from about $5,400 to about $7,800.
To pour a concrete driveway, expect midpoint pricing from $9 to $16 per sq ft depending on the finish and slab type. For 600 sq ft, that is about $5,400 to $9,600, with reinforced concrete at $7,200 and exposed aggregate at $7,800. Small jobs are also subject to a $2,000 minimum charge if the math comes in lower.